•
Press REPEAT DISC button to select a
repeat playback mode (a single repeat or
all songs repeat). Press again repeatedly
to cancel this repeat playback.
5. Press RETURN button to end the photo
viewing and go back to the previous
menu.
Zooming into an image
PLAYING A DISC
PRoGRAmmAbLE mEmoRY
CUSTomIZING THE FUNCTIoN SETTINGS
While a disc is playing, press the ZOOM button to enlarge the image in several levels.
•
•
•
While an image is zoomed, you can use the
and display the part you want.
To return to normal view, press the ZOOM button until the “ZOOM: OFF” shows. The screen
will return to normal.
When you reach the edge of the image, the display will not shift anymore in that direction.
,
,
or CURSOR button to shift the view
The two types of programmed playback provided by this unit are title/chapter programmed
playback and track programmed playback.
This user manual explains the basic
accompanying the specific DVD in question
for more information about the options
available on that DVD.
Note :
There are four options in the main setup
menu: System Setup, Language Setup, Audio
Setup and Video Setup.
LANGUAGE SETUP
1. Press the SETUP button in DVD mode.
2. Use button to select Language Setup.
instructions for operating this unit. Some
DVDs are produced in a manner that allows
specific or limited operation during playback.
Therefore, this unit may not respond to all
4. Press the RETURN button to go back to
Make sure video
out is activated in
the setting of iPod
Classic or iPod
Nano.
the previous menu.
Title / Chapter programmed playback
1. Press the MEMORY button.
may appear on the screen during
operation. Itmeansthatthedesiredoperation
is not permitted by the unit or disc.
In DVD mode, press SETUP to bring up the
main menu. Select one of the menu icons
across the top of the screen using the or
buttons. The menu’s options are displayed on
Playing Photos
1. In iPod Home menu, use the
operating commands. THIS IS NOT
A
2. Enter the title numbers in
highlight to chapter and enter the chapter numbers in
3. Use or button to move to the other field.
4. Repeat steps 2 to 3.
. Use button to move the
/
button
Display Function
OSD LANGUAGE
AUDIO LANG
DEFECT. Please refer to the instructions
.
to select Photos and press the OK button.
“Navigate your iPod Photo Library directly
from your iPod” will appear on the screen.
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display
,
,
Playing Videos
1. In iPod Home menu, use the
information on operation status.
SUBTITLE LANG
MENU LANG
the left side of the screen. Press the
,
,
/
button
or buttons to move to the option’s choices
on the right. Then press OK to select. Press
SETUP or RETURN if you want to exit.
5. Press the
playback.
PLAY button to start the programmed
Playing a Disc
1. Press the STANDBY / ON button to turn on
the unit.
See CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2.
2. Press the OPEN/CLOSE button to open
the disc tray.
3. Place a disc onto the disc tray with the
label side up.
4. Press the OPEN/CLOSE button to close
the disc tray. It takes a short while for your
unit to load the disc. After loading, for most
DVDs, the unit will automatically take you
main menu or start playing.
5. If the unit does not automatically start
playing the DVD, press the
button.
Audio Selection
to select Videos and press the OK button.
2. Use the button to select from Movies,
e.g.
On some DVDs, the sound is recorded in two
or more formats. Follow the directions below
to select the preferred language and sound
system.
/
Elapsed Time:
Elapsed time from the beginning of the
chapter/title which is currently playing.
Home
Note: If you press the STOP button twice, the programmed
selection will be cleared.
Music Videos, TV Shows, Video Podcasts
or Rentals, press the OK button to enter.
(“Navigate your iPod Video Library directly
from your iPod” will appear on the screen if
your are using an iPod touch.)
Docking System for iPod
Welcom
3. Use
,
,
or
button to select a
Music
Photos
language, then press the OK button.
The screen will change to your selected
language immediately.
3. To exit the SETUP MENU and return to
the normal screen, press the RETURN or
SETUP button.
SYSTEM SETUP
1. Press the SETUP button in DVD mode.
2. Select System Setup in the main menu
1. While a disc is playing, press the AUDIO
button to show the current audio format
number. e.g.
Track programmed playback
1. Press the MEMORY button.
2. Enter the track numbers in
Chapter Remaining time
Remaining Time:
Remaining time of the chapter/title which is
currently playing.
Videos
Settings
3. Use the
/
button to navigate the iPod
C
00:12:03
-
.
using the
,
,
or buttons.
menu lists and select a video, press the
OK button to begin playback. (You may
also use the control wheel and keys on
your iPod to operate it.)
3. Use or button to other field.
,
,
Title Elapsed time
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
2. Use the
/
button to navigate the iPod
00:30:15
Total time
02:01:22
T
Notes:
2. Press the AUDIO button repeatedly to
select the desired audio format.
Notes:
menu lists and select a photo, press the
OK button to begin playback. (You may
also use the control wheel and keys on
your iPod to operate it.)
HD OUTPUT
VIDEO
TV TYPE
DEFAULT
•
•
Some DVDs may not play in the audio
language selected. A prior language may
be programmed on the disc.
Some DVDs may be set to display subtitles
in a language other than the one you
selected. A prior subtitle language may be
programmed on the disc.
PLAYING PICTURE FILE DISC
Home
T
-
•
If only one audio format is recorded on the
DVD, the number does not change.
Some DVDs allow you to change audio
selections only via the disc menu. If this
is the case, press the MENU button and
choose the appropriate language on the
disc menu.
Docking System for iPod
Welcom
PLAY
•
•
Press the PAUSE button to pause, press
This unit can play picture files recorded on
CD-R and CD-RW discs.
Music
Photos
•
the
Press the
previous / next photo.
PLAY button to resume .
LoCATING A DESIRED SECTIoN
/
button to skip to the
3. Select a menu option using the
or
Videos
Settings
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To
resume normal playback, press the
button.
Each time you press the PAUSE button, the
picture advances one frame.
buttons and press OK button.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with
label side up.
3. Close the disc door.
4. The unit will load the disc and automatically
display the contents of the disc on the
screen, while playing the beginning of the
first picture file. These files will then be
played back one by one.
5. Press or button to select a picture file
to view.
•
•
Some DVDs allow you to change subtitle
selections only via the disc menu. If this
is the case, press the MENU button and
choose the appropriate subtitle language
from the selection on the disc menu.
Some DVDs may not include your pre-
selected language. In this case, the DVD
player automatically displays disc menus
consistent with the disc’s initial language
setting.
3. Press the RETURN button to go back to
Locating a specific chapter / track
Locating a specific time
You can move to specific location by
entering its corresponding time (hours,
minutes, seconds)
the previous menu.
PLAY
HD OUTPUT
If you know the chapter / track number you
want to play, you can locate a specifc chapter
/ track by directly selecting a chapter / track
number.
a
•
You can select different audio channels
(Stereo, Mono L, Mono R or Mix Mono)
on an Audio CD by pressing the AUDIO
button repeatedly.
This lets you select the resolution output
according to the connected TV. The
Composite Video Out (YELLOW jack) will be
kept in standard resolution for all HD OUTPUT
settings.
•
•
•
Press the PAUSE button to pause, press
Using a iPod Touch to view the photo
the
Press the
previous / next movie.
Press the
PLAY button to resume.
1. In iPod Home menu, use the
/
button
1. Press the GOTO button.
/
button to skip to the
to select Photos and press the OK button.
“Navigate your iPod Photo Library directly
from your iPod” will appear on the screen.
2. Touch the “Photos” selection on iPod panel,
and then select the photo your prefer.
1. Press the GOTO button to search your
desired chapter / track.
2. Press or button to highlight a chapter /
track and press the corresponding number
button(s) for the chapter you want.
2. Press or button to highlight time.
3. Press the corresponding number buttons
for the setting point you want.
4. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
Folders
Files within the
current folder
Stopping Playback
/
button to begin fast
Subtitle Selection
1. While DVD is playing, press the
•
Press the
STOP button at the location
reverse/forward, press the
to resume normal playback.
PLAY button
NOTE:
a
•
Supported HD JPEG mode: 480p, 720p,
1080I and 1080p.
where you want to interrupt playback. To
resume playback at the position where
the disc was stopped, press the
button.
•
•
•
You can press the
interrupt playback, and press the PLAY
button to resume playback.
You can use the GOTO function or use the
numbered buttons to enter the number of a
picture file to quickly select the image.
Press the ANGLE button on the remote control
to rotate the picture orientation by 90°.
PAUSE button to
SUBTITLE button to display the current
language setting, as shown in the
example.
4. Press the RETURN button to go back to
the previous menu.
3. Touch the “
” to confirm the photo.
3. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
PLAY
AUDIO SETUP
4. Touch the “ Yes ” to activate iPod’s video
output. The photo will appear on the
screen.
VIDEO
6. Press the
,
,
or CURSOR button
1. Press the SETUP button in DVD mode.
2. Select Audio Setup in the main menu using
the or buttons.
Only available when HD OUTPUT is 480p.
•
If you press the STOP button twice, the
to view and select the files that you want to
view, then press the OK button to confirm
the selected file.
Note : Make sure TV Out in iPod is set to ON
when you are playing the video.
Notes :
unit’s memory will be cleared and pressing
2. Press the SUBTITLE button repeatedly to
select the desired subtitle language.
Notes:
INTERLACE-YUV :
•
•
•
Some discs may not respond to this
process.
Some scenes may not be located as
precisely as you specified.
This method for accessing specific
locations is available only within the current
title of the DVD disc.
the
PLAY button will reset the disc to
Step 2
•
Select if you are connecting the player
with Component Video outputs to a non-
Progressive Scan TV.
the beginning.
Settings
1. In iPod Home menu, use the
•
Some DVDs are set to display subtitles
automatically, and you cannot turn them
off even if you set the subtitle function to
off.
/
button
Fast Forward / Fast Reverse
1. Press the SEARCH
button when a disc is playing. Each time
you press the SEARCH
button, the playback speed changes in
the following sequence:
Locating a specific title
to select Settings and press the OK
button.
AUDIO OUT
P-SCANYPBPR :
iPod FEATURES
or SEARCH
If a DVD disc contains title numbers, you can
locate a specific title by directly selecting a
title number.
•
Select if you are connecting the player with
Component Video outputs to a Progressive
Scan TV.
2. Use the
/
button to select from Shuffle,
iPod Dock Adapter
Connecting your iPod
or SEARCH
•
•
During some scenes, the subtitles may not
appear immediately after you select your
desired scene.
The number of subtitle languages recorded
differs depending on the disc. If only one
language is recorded, the language does
not change.
Repeat or Lanuage. Press the OK button
to enter the settings.
Before connecting your iPod, you need to
install the appropriate iPod Dock Adapter
(supplied with the iPod) in the dock of the
unit.
Warning: To prevent damage to the unit and/
or your iPod, connect or remove your iPod
when the unit is powered off or the unit is not
in the iPod mode.
1. In stop mode, press the GOTO button.
2. Press or button to highlight a specific
field and press the corresponding number
button(s) for the title you want.
3. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
S-VIDEO :
Select if you are connecting the player with
3. Use the
/
button to a setting, press the
•
OK button to confirm.
4. Press the RETURN button to go back to
the previous menu.
S-VIDEO output to a TV with S-VIDEO
input.
3. Select a menu option using the
,
,
or
PLAY
FORWARD x2
FORWARD x20
FORWARD x4
FORWARD x8
Step 3
Step 4
buttons and press OK button.
1. Ensure the appropriate iPod Dock adapter
that was supplied with your iPod is
installed.
2. Insert your iPod into the connector in the
dock.
Installing the iPod Dock Adapter
1. Push to open the iPod docking door.
2. Place your iPod Dock Adapter into the
dock until it sits firmly in place.
TV TYPE
•
•
This function can only be used for discs
on which subtitles have been recorded in
multiple languages.
Some DVDs allow you to change subtitles
only via the disc menu. If this is the case,
press the MENU button and choose the
appropriate subtitle on the disc menu.
Depending on the format of the DVD, you can
choose the picture format (aspect ratio) best
suited to the format of your TV screen:
or
PLAY
AUDIO OUT
Home
Docking System for iPod
Select the output sound format corresponding
to your system connection. When making
connection to a TV or stereo system via the
analog audio jacks, select PCM or RAW.
BACKWARD x2
BACKWARD x20
BACKWARD x4
Welcom
Music
Photos
3. Press the SOURCE button to select the
iPod mode. Your iPod will be connected
automatically, and iPod Home menu
appears.
iPod Dock Adapter
4:3 PS (Pan Scan)
REPEAT PLAYbACK
BACKWARD x8
•
When wide-screen
video is played, this
mode clips the right
and left sides of
the image so that it
can be viewed on a
conventional screen.
Some wide-screen
DVDs that do not
permit Pan Scan
mode playback are
automatically played
in letterbox mode
(black bands top and
bottom).
Videos
Settings
Cut off when
screen video image is
played.
a
wide-
2. Press the
reach the desired point to resume normal
playback.
Notes:
PLAY button when you
You can play
repeatedly. (Title repeat, chapter repeat, A-B
repeat)
a
specific title or chapter
To resume normal playback
3. Press the REPEAT DISC button until the
RAW: Does not have a Dolby Digital Decode.
PCM: Select when connected to a 2 channel
digital stereo amplifier.
REP:
[ OFF ] indicator displays on the
Angle Selection
Home
•
•
•
Shuffle : Select from Shuffle Off, Shuffle
Songs and Shuffle Albums.
Repeat : Select from Repeat Off, Repeat
One and Repeat All.
screen.
5. Press RETURN button to end the photo
viewing and go back to the previous
menu.
Docking System for iPod
Welcom
Some DVDs contain scenes which have been
shot from a number of different angles. For
these discs, the same scene can be viewed
from each of these different angles.
1. While you are playing a DVD with different
angles recorded, press the ANGLE button
to view the number of current angles
available.
Repeating a chapter
•
The unit mutes sound and subtitles during
reverse and forward scan of DVDs.
The fast playback speed may differ
depending on the disc.
•
If apply HDMI connection to TV, make sure
to select PCM, audio signal passing to TV
via HDMI cable.
You can play the same chapter repeatedly.
1. Whilethediscisplaying, presstheREPEAT
DISC button until the REP: [ CHAPTER ]
indicator displays on the screen. The
current chapter is played repeatedly.
Music
Photos
You can play a specific section repeatedly.
•
•
Removing the iPod Dock Adapter
1. Remove the iPod Dock Adapter as
shown.
Repeating a specific section
1. While the disc is playing, press the
REPEAT A-B button at the beginning of
the section (REPEAT A- is displayed) you
want to play repeatedly.
2. Press the REPEAT A-B button again at
the end of the section ( REPEAT A-B is
displayed).
Videos
Settings
PAN SCAN
Language : Select OSD language.
Using a iPod Classic / iPod Nano to
view the photo
VIDEO SETUP
2. Replace it with another one you need.
Skipping to a Different Chapter/Title
WARNING: Due to the i-Pod limitation, not
all functions of some i-Pod models can be
controlled via the remote control.
1. In iPod Home menu, use the
/
button
1. Press the SETUP button in DVD mode.
2. Select Video Setup in the main menu using
the or buttons.
Repeating a title
•
•
•
Press the
current or previous chapters/tracks.
Press the
chapters/tracks.
For audio CDs, use the number buttons on
the remote control to jump immediately to
the desired track number.
PREV button to go back to
to select Photos and press the OK button.
“Navigate your iPod Photo Library directly
from your iPod” will appear on the screen.
button to select “Photos”,
and then press the OK button to confirm.
You can play the same title repeatedly.
2. While the disc is playing, press
the REPEAT DISC button until the
2. Press the ANGLE button repeatedly to
change the scene to the next recorded
angle. e.g.
Note:
NEXT button to advance
•
Your iPod will be charged automatically
(until fully charged) once it is connected,
no matter whether the unit is in iPod mode
or not.
Please Navigate directly on your iPod
OR
2. Press the
/
LETTER BOX
REP:
[ TITLE ] indicator displays on
4:3 LB (Letter Box)
When wide-screen
video is played
in this mode on
the screen. The current title is played
repeatedly.
3. The unit will immediately begin replaying
your selection.
•
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
Press The [CLEAR] Key
to go back to main menu
3. Use the
button to select a photo,
press the OK button to begin playback.
•
Make sure the software of iPod is the
a
To resume normal playback
3. While the disc is playing, press
the REPEAT DISC button until the
REP:
screen.
To resume normal playback
latest.
conventional screen,
black bands appear
at the top and bottom
of the screen.
4. While the disc is playing, press the
REPEAT A-B button until the A-B CANCEL
indicator displays on the screen.
Slow-motion Play
1. Press the SLOW button on the remote in
play mode.
Step 2
Step 3
IMPORTANT:
Before docking your iPod. MAKE SURE your
iPod has the latest FIRMWARE.
Playing Music
1. In iPod Home menu, use the
If the above screen appears, you may need
to control the iPod Library directly from your
iPod.
WIDE SCREEN
/
button
[ OFF ] indicator displays on the
to select Music and press the OK button.
2. Use the button to select from
Playlists, Artists, Albums, Songs, Genres
or Composers. Press the OK button to
enter.
•
Each time the SLOW button is pressed, the
speed of slow-motion playback changes in
the following sequence:
/
Notes:
16:9 (Wide screen)
3. Select
Saturation or Sharpness using the
Brightness,
Contrast,
Hue,
or
You can play a single track and whole disc
repeatedly.
•
Some discs may not permit A-B repeat
operation.
•
This is the correct mode for playing wide-
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
screen videos on a wide-screen.
Notes :
•
•
After approx. two seconds, playback will
continue from the new angle you selected.
If no button is pressed within 10 seconds,
playback continues without changing the
current angle.
buttons, hightlight your selections and
press OK button.
•
A-B repeat can only be used within the
same title. If the start and end of the
section to be repeated are in different titles,
A-B repeat is cancelled.
SF 1/2
SF 1/3
PLAY
SF 1/4
SF 1/7
SF 1/5
SF 1/6
Repeating a single track
3. Use the
/
button to navigate the iPod
•
•
The displayable picture size is preset on the
You can play the same track repeatedly.
1. While the disc is playing, press
the REPEAT DISC button until the
4. Press OK button twice to activate photo
menu lists and select songs, press the OK
button to begin playback. (You may also
use the control wheel and keys on your
iPod to operate it.)
DVD disc. Therefore the playback picture
of some DVD discs may not conform to the
picture size you select.
When you play DVD discs recorded in the
4:3 aspect ratio, the playback picture will
always appears in the 4:3 aspect ratio
regardless of the TV TYPE setting.
showing to TV screen.
•
•
You can specify a segment only within the
current title or track.
The A-B repeat function does not operate
in scenes where different camera angles
are recorded.
Step 4
2. Press the
normal playback speed.
PLAY button to return to
REP:
[ REP 1 ] indicator displays on
the screen. The current track is played
repeatedly.
Notes:
•
•
•
Press the PAUSE button to pause, press
•
This function can only be used for discs
the
Press the
previous / next song.
Press the
PLAY button to resume.
on which scenes shot from multiple angles
have been recorded.
Repeating a whole disc
2. While the disc is playing, press
the REPEAT DISC button until the
/
button to skip to the
Specifications and external appearance are
subject to change without notice.
•
If only one angle is recorded, “
: 1/1” is
/
button to begin fast
DEFAULT
displayed.
REP:
[ REP ALL ] indicator displays
reverse/forward, press the
to resume normal playback.
PLAY button
It takes 3-5 seconds to reset the unit to the
factory default.
on the screen. The whole disc is played
repeatedly.
Printed in China
811-300I91W011
6
7
8
9
10
DRC300i IB ENG REV1.indd
1
7/14/2008 9:51:19 AM
|